Additive Manufacturing Current State Future Potential Gaps and Needs and Recommendations

ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering

Journal of Biomechanical Engineering

Journal of Computational and Nonlinear Dynamics

Journal of Computing and Information Science in Engineering

Journal of Dynamic Systems, Measurement, and Control

Journal of Electrochemical Energy Conversion and Storage

Journal of Energy Resources Technology

Journal of Engineering and Science in Medical Diagnostics and Therapy

Journal of Engineering for Gas Turbines and Power

Journal of Engineering Materials and Technology

Journal of Manufacturing Science and Engineering

Journal of Micro and Nano-Manufacturing

Journal of Nanotechnology in Engineering and Medicine

Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems

Journal of Nuclear Engineering and Radiation Science

Journal of Offshore Mechanics and Arctic Engineering

Journal of Pressure Vessel Technology

Journal of Solar Energy Engineering

Journal of Thermal Science and Engineering Applications

Journal of Verification, Validation and Uncertainty Quantification

Journal of Manufacturing Science and Engineering Volume 137 Issue 1 Technology Review

Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations

Department of Mechanical and Aerospace Engineering,

Department of Mechanical and Aerospace Engineering,

Missouri University of Science and Technology,

Department of Mechanical Engineering,

National Institute of Standards and Technology (NIST),

Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OFMANUFACTURINGSCIENCE ANDENGINEERING. Manuscript received April 19, 2014; final manuscript received September 22, 2014; published online November 26, 2014. Assoc. Editor: David L. Bourell.

This material is declared a work of the US Government and is not subject to copyright protection in the United States. Approved for public release; distribution is unlimited.

137(1), 014001 (Feb 01, 2015) (10 pages)

Paper No: MANU-14-1231; doi: 10.1115/1.4028725

History: Received April 19, 2014; Revised September 22, 2014; Online November 26, 2014

Additive manufacturing (AM), the process of joining materials to make objects from three-dimensional (3D) model data, usually layer by layer, is distinctly a different form and has many advantages over traditional manufacturing processes. Commonly known as 3D printing, AM provides a cost-effective and time-efficient way to produce low-volume, customized products with complicated geometries and advanced material properties and functionality. As a result of the 2013 National Science Foundation (NSF) Workshop on Frontiers of Additive Manufacturing Research and Education, this paper summarizes AMs current state, future potential, gaps and needs, as well as recommendations for technology and research, universityindustry collaboration and technology transfer, and education and training.

Topics:ManufacturingEducationAdditive manufacturingCollaborationDesign

Learn about subscription and purchase options

Your Session has timed out. Please sign back in to continue.

ASTM International Committee F42 on Additive Manufacturing Technologies, ASTM F279210 Standard Terminology for Additive Manufacturing Technologies

Wohlers Report 2013: Additive Manufacturing and 3D Printing State of the Industry

, Wohlers Associates, Fort Collins, CO.

Bourell, D. L., Beaman, J. J., Leu, M. C., and Rosen, D. W., 2009, A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead, Proceedings of RapidTech 2009: US-TURKEY Workshop on Rapid Technologies, Istanbul, Turkey, Sept. 2425, pp. 18.

Kruth, J. P., Leu, M. C., and Nakagawa, T., 1998, Progress in Additive Manufacturing and Rapid Prototyping, CIRP Ann. Manuf. Technol., 47(2), pp. 525540.

Guo, N., and Leu, M. C., 2013, Additive Manufacturing: Technology, Applications and Research Needs, Front. Mech. Eng., 8(3), pp. 215243.

Bourell, D. L., Leu, M., and Rosen, D., 2009,

Roadmap for Additive ManufacturingIdentifying the Future of Freeform Processing

Frontiers of Additive Manufacturing Research and Education

, University of Florida, Gainesville, FL. (Accessed Aug. 15, 2014)

Mironov, V., Viconti, R. P., Kasyanov, V., Forgacs, G., Drake, C. J., and Markwald, R. R., 2009, Organ Printing: Tissue Spheroids as Building Blocks, Biomaterials, 30(12), pp. 21642174.

Ringeisen, B. R., Pirlo, R. K., Wu, P. K., Boland, T., Huang, Y., Sun, W., Hamid, Q., and Chrisey, D. B., 2013, Cell and Organ Printing Turns 15: Diverse Research to Commercial Transitions, MRS Bull., 38(10), pp. 834843.

Riggs, B. C., Dias, A. D., Schiele, N. R., Cristescu, R., Huang, Y., Corr, D. T., and Chrisey, D. B., 2011, Matrix-Assisted Pulsed Laser Methods for Biofabrication, MRS Bull., 36(12), pp. 10431050.

Xu, C., Chai, W., Huang, Y., and Markwald, R. R., 2012, Scaffold-Free Inkjet Printing of Three-Dimensional Zigzag Cellular Tubes, Biotechnol. Bioeng., 109(12), pp. 31523160.

Measurement Science Roadmap for Metal-Based Additive Manufacturing

Kalpakjian, S., and Schmid, S. R., 2008,

Manufacturing Processes for Engineering Materials

, 5th ed., Prentice Hall, Upper Saddle River, NJ.

Scott, J., Gupta, N., Weber, C., Newsome, S., Wohlers, T., and Caffrey, T., 2012,

Additive Manufacturing: Status and Opportunities

, Science and Technology Policy Institute, Washington, DC.

Gibson, I., Rosen, D. W., and Stucker, B., 2010,

Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing

Chua, C. K., Leong, K. F., and Lim, C. S., 2010,

Rapid Prototyping: Principles and Applications

, 3rd ed., World Scientific, Singapore, Singapore.

Manufacturing: The Third Industrial Revolution

Jackson, T. R., Liu, H., Patrikalakis, N. M., Sachs, E. M., and Cima, M. J., 1999, Modelling and Designing Functionally Graded Material Components for Fabrication With Local Composition Control, Mater. Des., 20(23), pp. 6375.

Liou, F., Slattery, K., Kinsella, M., Newkirk, J., Chou, H. N., and Landers, R., 2007, Applications of a Hybrid Manufacturing Process for Fabrication of Metallic Structures, Rapid Prototyping J., 13(4), pp. 236244.

Wohlers, T., and Caffrey, T., 2013, Additive Manufacturing: Going Mainstream, Manufacturing Eng., 151(6), pp. 6773.

Deuser, B. K., Tang, L., Landers, R. G., Leu, M. C., and Hilmas, G. E., 2013, Hybrid Extrusion ForceVelocity Control Using Freeze-Form Extrusion Fabrication for Functionally Graded Material Parts, ASME J. Manuf. Sci. Eng., 135(4), p. 041015.

Fathi, S., Dickens, P., Khodabakhshi, K., and Gilbert, M., 2013, Microcrystal Particles Behaviour in Inkjet Printing of Reactive Nylon Materials, ASME J. Manuf. Sci. Eng., 135(1), p. 011009.

Popescu, G. A., Mahale, T., and Gershenfeld, N., 2006, Digital Material for Digital Printing, Proceedings of Digital Fabrication 2006, Denver, CO, Sept. 1722, pp. 5557.

Hiller, J., and Lipson, H., 2010, Tunable Digital Material Properties for 3D Voxel Printers, Rapid Prototyping J., 16(4), pp. 241247.

Cheung, K. C., and Gershenfeld, N., 2013, Reversibly Assembled Cellular Composite Materials, Science, 341(6151), pp. 12191221.

Treehugger (Accessed Apr. 15, 2014)

The Manufacturing Institute (Accessed Apr. 15, 2014)

Four essential technology elements and system integration for viable AM

Return to:Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations

Copyright in the material you requested is held by the American Society of Mechanical Engineers (unless otherwise noted). This email ability is provided as a courtesy, and by using it you agree that you are requesting the material solely for personal, non-commercial use, and that it is subject to the American Society of Mechanical Engineers Terms of Use. The information provided in order to email this topic will not be used to send unsolicited email, nor will it be furnished to third parties. Please refer to the American Society of Mechanical Engineers Privacy Policy for further information.

Huang Y, Leu MC, Mazumder J, Donmez A. Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations. ASME.

2015;137(1):01-10. doi:10.1115/1.4028725.

Customize your page view by dragging and repositioning the boxes below.

Additive Manufacturing Constraints in Topology Optimization for Improved Manufacturability

A Computationally Efficient Finite Element Framework to Simulate Additive Manufacturing Processes

Predicting microstructure evolution during directed energy deposition additive manufacturing of Ti-6Al-4V

Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing

Quantifying Geometric Accuracy With Unsupervised Machine Learning: Using Self-Organizing Map on Fused Filament Fabrication Additive Manufacturing Parts

Ascertaining Affective Domain in Engineering: A New Learning Concept

Coordinating College-Wide Instructional Change Through Faculty Communities

Toward the Next Generation Micro-Nanosystems: Technology and Industry Development in Japan

A Test Bed for Small Aero Gas Turbines for Education and for University: Industry Collaboration

Education and Implementation of an Approach for New Product Design: An Industry-University Collaboration

Coordinating College-Wide Instructional Change through Faculty Communities

Advances in Multidisciplinary Engineering

Bacteriophage T4 Tail Fibers as a Basis for Structured AssembliesChapter 1

Motion Analysis for Multilayer Sheets

Ultrasonic Welding of Lithium-Ion Batteries

Section III: Subsections NC and NDClass 2 and 3 Components

Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 1, Fifth Edition

You do not have access to this content.

The American Society of Mechanical Engineers

Sorry!You do not have access to this content. For assistance or to subscribe, please contact us:

The alert will be sent to + $(inputtxtUserAlertEmailAddress).val(); );

Sign in or create your free personal ASME account. This will give you the ability to save search results, receive TOC alerts, RSS feeds, and more.

Shibboleth is an access management service that provides single sign-on protected resources. It replaces the multiple user names and passwords necessary to access subscription-based content with a single user name and password that can be entered once per session. It operates independently of a users location or IP address. If your institution uses Shibboleth authentication, please contact your site administrator to receive your user name and password.